Enhanced energy storage properties of Ba0.4Sr0.6TiO3 lead-free ceramics with Bi2O3-B2O3-SiO2 glass addition

In this study, we present an effective strategy to enhance the energy storage properties of Ba_0.4Sr_0.6TiO₃ (BST) lead-free ceramics by the addition of Bi₂O₃-B₂O₃-SiO₂ (BBS) glass, which were prepared by the conventional solid state sintering method. The phase structure, microstructure and energy storage properties were investigated in detail. It can be found that the Ba_0.4Sr_0.6TiO₃-x wt%(Bi₂O₃-B₂O₃-SiO₂) (BST- x wt%BBS, 0 ≤ x ≤ 12) ceramics possess large maximum polarization (P_max), low remanent polarization (P_r) and slim polarization electric field (P-E) hysteresis loops. The breakdown strength (BDS), recoverable energy storage density (W_rec) and energy storage efficiency (η) are enhanced obviously with the addition of BBS glass. The BST-9 wt%BBS ceramic is found to exhibit excellent energy storage properties with a W_rec of 1.98 J/cm³ and a η of 90.57% at 279 kV/cm. These results indicate that the BST-x wt%BBS ceramics might be good candidates for high energy storage applications.     

Seismic life-cycle cost analysis of ageing highway bridges under chloride exposure conditions: modelling and recommendations

Chloride-induced corrosion of highway bridges constitutes a critical form of environmental deterioration and may result in significant escalation of seismic life-cycle costs due to increased fragility during earthquake events. Most of existing literature tends to adopt simplistic uniform area loss assumptions in lieu of potentially complex, yet realistic and more detrimental, pitting corrosion models for seismic vulnerability analysis. Since the degree of deterioration depends on the severity and duration of exposure, there exists a need to investigate the influence of uniform vs. pitting corrosion assumption on seismic life-cycle costs for varied chloride exposure conditions. A case-study example of a highway bridge in Central and Southeastern US reveals consideration of pitting corrosion as critical for extreme exposures compared to relatively minor settings. Subsequently this study provides recommendations to aid bridge engineers and stakeholders to balance between computational cost and accuracy of results to aid prompt decisions on rehabilitation of ageing bridges in different exposure conditions. A framework is also included to compute seismic life-cycle costs from generic measures of corrosion, independent of assumed exposure scenario. This framework is particularly helpful for seismic loss assessment of highway bridges in chloride exposure zones with periodic field measurements to estimate the extent of structural deterioration.     

Extraction optimization and adsorption isotherm kinetics of polyphenols from blossoms of Citrus aurantium L. var. amara Engl

ABSTRACT

Crude extracts were extracted from blossoms of Citrus aurantium L. var. amara Engl. with 50% ethanol (CAVAP-E), 50% methanol (CAVAP-M), and hot water (CAVAP-W). CAVAP-W had the highest polyphenol yield of 3.7%. The optimum values of liquid/solid ratio, ultrasonic time, and ultrasonic power were 34.06 mL/g, 1 h, and 81.04 W, respectively. The adsorption characteristics of polyphenols were investigated using different macroporous resins. AB-8 and HP-20 resins offered higher adsorption and desorption capacities. Langmuir equation was more suitable to predict the adsorption of polyphenols. The pseudo second-order model was satisfactory to describe the kinetic data of polyphenols onto AB-8 and HP-20.     

Molecular Epidemiology of Enteroaggregative Escherichia coli (EAEC) Isolates of Hospitalized Children from Bolivia Reveal High Heterogeneity and Multidrug-Resistance

Enteroaggregative Escherichia coli (EAEC) is an emerging pathogen frequently associated with acute diarrhea in children and travelers to endemic regions. EAEC was found the most prevalent bacterial diarrheal pathogen from hospitalized Bolivian children less than five years of age with acute diarrhea from 2007 to 2010. Here, we further characterized the epidemiology of EAEC infection, virulence genes, and antimicrobial susceptibility of EAEC isolated from 414 diarrheal and 74 non-diarrheal cases. EAEC isolates were collected and subjected to a PCR-based virulence gene screening of seven virulence genes and a phenotypic resistance test to nine different antimicrobials. Our results showed that atypical EAEC (a-EAEC, AggR-negative) was significantly associated with diarrhea (OR, 1.62, 95% CI, 1.25 to 2.09, p < 0.001) in contrast to typical EAEC (t-EAEC, AggR-positive). EAEC infection was most prevalent among children between 7–12 months of age. The number of cases exhibited a biannual cycle with a major peak during the transition from warm to cold (April–June). Both typical and a-EAEC infections were graded as equally severe; however, t-EAEC harbored more virulence genes. aap, irp2 and pic were the most prevalent genes. Surprisingly, we detected 60% and 52.6% of multidrug resistance (MDR) EAEC among diarrheal and non-diarrheal cases. Resistance to ampicillin, sulfonamides, and tetracyclines was most common, being the corresponding antibiotics, the ones that are frequently used in Bolivia. Our work is the first study that provides comprehensive information on the high heterogenicity of virulence genes in t-EAEC and a- EAEC and the large prevalence of MDR EAEC in Bolivia.     

Multi-Scale Analysis of Fretting Fatigue in Heterogeneous Materials Using Computational Homogenization

This paper deals with modeling of the phenomenon of fretting fatigue in heterogeneous materials using the multi-scale computational homogenization technique and finite element analysis (FEA). The heterogeneous material for the specimens consists of a single hole model (25% void/cell, 16% void/cell and 10% void/cell) and a four-hole model (25% void/cell). Using a representative volume element (RVE), we try to produce the equivalent homogenized properties and work on a homogeneous specimen for the study of fretting fatigue. Next, the fretting fatigue contact problem is performed for 3 new cases of models that consist of a homogeneous and a heterogeneous part (single hole cell) in the contact area. The aim is to analyze the normal and shear stresses of these models and compare them with the results of the corresponding heterogeneous models based on the Direct Numerical Simulation (DNS) method. Finally, by comparing the computational time and % deviations, we draw conclusions about the reliability and effectiveness of the proposed method.     

Bearing Failure Optimization of Composite Double-Lap Bolted Joints Based on a Three-Step Strategy Marked By Feasible Region Reduction and Model Decoupling

To minimize the mass and increase the bearing failure load of composite doublelap bolted joints, a three-step optimization strategy including feasible region reduction, optimization model decoupling and optimization was presented. In feasible region reduction, the dimensions of the feasible design region were reduced by selecting dominant design variables from numerous multilevel parameters by sensitivity analyses, and the feasible regions of variables were reduced by influence mechanism analyses. In model decoupling, the optimization model with a large number of variables was divided into various sub-models with fewer variables by variance analysis. In the third step, the optimization sub-models were solved one by one using a genetic algorithm, and the modified characteristic curve method was adopted as the failure prediction method. Based on the proposed optimization method, optimization of a double-lap single-bolt joint was performed using the ANSYS^® code. The results show that the bearing failure load increased by 13.5% and that the mass decreased by 8.7% compared with those of the initial design of the joint, which validated the effectiveness of the three-step optimization strategy.     

Phase Field Modelling Allotropic Transformation of Solid Solution

Based on multiphase field conception and integrated with the idea of vectorvalued phase field, a phase field model for typical allotropic transformation of solid solution is proposed. The model takes the non-uniform distribution of grain boundaries of parent phase and crystal orientation into account in proper way, as being illustrated by the simulation of austenite to ferrite transformation in low carbon steel. It is found that the misorientation dependent grain boundary mobility shows strong influence on the formation of ferrite morphology comparing with the weak effect exerted by misorientation dependent grain boundary energy. The evolution of various types of grain boundaries are quantitatively characterized in terms of its respective grain boundary energy dissipation. The simulated ferrite fraction agrees well with the expectation from phase diagram, which verifies this model.